Jumberca circular knitting machine lubrication

Jumberca knitting oil

PRODUCT	ISO VG	Flash Point	APPLICATION	PDF
Molylub KnitTex W 22 KnitTex W 32 KnitTex W 46	22 32 46	205 212 214	Single Jersey Machines Double Jersey Machines Sweater Machines Univawe or Pulsonic oiler for lubrication of cams and needles

1. Design of automatic glove knitting machine is based on principle of sinker knitting
2. Omit knitting process of stitching and connecting by fingers.
3. Touching button only, can change the size of the gloves as well as number of
rubber-band feeding.
4. Application of computer makes quicker and better knitting of each part of gloves.
5. After hot melting yearn, glove cuff is shaped when heating by special equipment
only.
6. Frequency conversion and speed adjustment saves energy

Specification performance :

1. Purpose: can knit working gloves, half-finger gloves, jacquard gloves etc.
2. Specification: 7-stitch, 8-stitch, 10-stitch
3. Size of gloves:7-stitch (SML), 8-stitch (SML), 10-stitch (SML)
4. Dragged by: single-phase AC motor of 50Hz, 220V and 0.25KW
5. Speed adjusted by: single-phase frequency converter of 0.4KW
6. Control system: computer control
7. Automatic stop device: this machine is equipped with automatic stop devices
when yearn break, direction error and not lay-off
8. Transmission mechanism: cam, crank mechanism
9. Stitch-selecting mechanism: stitch-selecting cylinder device
10. Lubrication device: central lubrication of manual pump

Molylub KnitTex W 32                                   

Extraordinary scourable new generation water clear knitting oil for Textile Industry JUMBERCA high-speed circular knitting machines and socking knitting machines.

Application:

High speed, large and small diameter circular electronically or mechanically controlled Single- and Double- Jersey knitting machines, stocking knitting machines, its needles, sinkers, needle cylinders, dials, tuck cams.

Properties :

• special formulation based on white oil with product-specific active agents
• high oxidation resistance, excellent aging stability limiting stains, sludge and sediment formation
• contains special emulsifying component additives guaranteeing high scourability both at high and low temperatures through conventional washing processes
• maximized shelf life for key stitch forming parts such as needles, sinkers and tuck cams
• ground breaking anti-wear technology, protecting your machine from wear and corrosion
• Noise and vibration dampening
• compatible with Elastane fibers, frame paints, plastics and electronic components
• Biodegradable and safe for skin

Specification and Approvals:

Classified as DIN 62 136-1 and DIN 51360 for needle and sinker oils based on mineral oil.

ISO VG 32

GOTS 3.0; GOTS 4.0; OEKO-TEX compliance

OECD-301C

Corresponds to performance level requirements of Jumberca

Technical characteristics:

Advice

Please always check the washability under real conditions in your production. Monitor the

lubricant quantity and to readjust it, if necessary Advice on applications not covered in this leaflet may be obtained from your Molylub representative