Neat cutting oils

Neat oils for

metal cutting operations

PRODUCT	Viscosity at 40 °C	Metals	APPLICATION	PDF
Molylub Thread AL 3300	24	all kinds of steel, aluminium	for thread operations (e. g. thread cutting, thread rolling and thread tapping) as well as for deep whole drilling
Supercut AL	20	Specially for aluminium	For thread cutting, difficult machining

Molylub Thread A 3300

Deep hole drilling, treading and tapping oil – non water-miscible

Description:     Preparation based on mineral oil with a low content of aromatic hydrocarbons, phosphor- and sulphur-containing additives, modified fatty acid derivates as well as antioxidants and anticorrosion agents.

• Cools threads and pipe during operation.
• Speeds metal removal.
• Improves thread quality.
• Reduces threading torque.
• Keeps machines running cooler and extends the life of your dies

Typical technical

Characteristics:                   Appearance:                                 clear, brown liquid

                                           Density at 15 °C/59 °F:                  915 kg/m³

                                           kin. Viscosity at 40 °C/104 °F:        24.0 mm²/s

Pour point:                                    <-18 °C/-0.4°F

Flash point:
(DIN EN ISO 2592, COC)                >165 °C/329 °F

Copper corrosion

(3 h/100 °C/212 °F):                       2 c – slight discolouration

Applications:    This fluid is used undiluted for deep hole drilling in conjunction with all known tooling systems. As well perfectly suited for threading and tapping operations. Formulated for high speed cutting machines

Remarks:

• The product is classified as non hazardous.
• Water endangering liquid, rated WGK 2 in Germany (self-classification)
• Do not allow the material to enter drains or watercourses.
• Limited application on non ferrous materials (risk of staining).